Foam Board Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use this stand to hold your standard thickness 3/16" or 5mm foam board for displays, privacy screens, and more...
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 170
- Makes
- 0
- Views
- 1,058
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Show off that display you've created, stand up your presentations, or create a barrier free of prying eyes with this simple yet effective standoff for your standard 3/16" or 5mm foamboard that you can find anywhere. Each stand has a small pillar in the middle that will embed itself into the board's center foam (version without the pillar available) and will hug the corners to keep the board securely in place. Please note that this stand will fit tightly onto the edges of your board, so make sure to squeeze them in.
Print Instructions
- Supports not required
- Print at 10-20% infill
- You can scale for thicker/thinner foam board
- The pillar is a small piece and may not print the same as on my printer, so if using a thicker nozzle it is preferred to print the version without it