1 / 1
Kp3S Z axis spacer for SnakeOilXY mod.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is simple spacer for z axis adjust screw on kp3s SnakeOil Mod.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
An easy print. I didn't have a longer screw for SnakeOil mod so i made this.
It fits the z spacer screw with almost zero movement but i recommend either gluing it or making use of a 3D pen to hold it on to the screw.
Thanks to a little flat screwdriver like construction you can more easily adjust the z offset than with the original.
You can also try to print it with like 99% scale and use a torch to heat up the screw and make an inset.