Playstation 2 Quiet Fan Mod - compatible with fans from 50x10mm to 60x25mm (Noctua)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mod allowing fans from 50x10mm up to 60x25mm for the PS2 FAT 3X000 Tested on a SCPH-3901 +HDD +Noctua NF-A6x25 5V
- Ocena
- 5 / 5
- Polubienia
- 88
- Pobrania
- 880
- Wydruki
- 3
- Wyświetlenia
- 7313
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
Edit from April 24th 2023
Per request, I've added holes which “should” work with SCPH-3000x
I don't have any other model on hands than my 39000 so do it at your own risk.
I'm keeping the old ones working on 39000 for now.
---------------------------------------------------------------------
Here's a mod to replace the fan of a PS2 FAT SCPH-3X000
You can use fans from 50x10mm up to 60x25mm.
The 25mm one needs to print the two parts, the “grid” is sliding in a similar way the original fan does.
Fixing the fan by using the 7/32" standard PC fan screws .
---------------------------------------------------------------------
Printing:
I've tried to mange overhangs as best as I could but some might be troublesome, especially the “gutter” for sliding the AC switch/plug part. Don't go crazy on density.
---------------------------------------------------------------------
I STRONGLY SUGGEST YOU TO USE A 5V FAN since the Playstation 2 original fan is 7V (only spin at full speed with an HDD plugged).
You can make your own adapter with:
- a MICRO JST SH 2pin (1.0 mm)
- a 10ohms 1W resistor (to drop voltage from 7v to 5v at full speed)
- PC Fan connector, like https://www.amazon.ca/dp/B09SDWD1RC you can also salvage one if you are using a Noctua.
If you are using a 12v, it will spin, but only half its speed and may not be up to original one as moving air.
-----------------------------------------------------------------------
Tested on a SCPH-3900 +HDD +Noctua NF-A6x25 5V, printed in PETG