Playstation 2 Quiet Fan Mod - compatible with fans from 50x10mm to 60x25mm (Noctua)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mod allowing fans from 50x10mm up to 60x25mm for the PS2 FAT 3X000 Tested on a SCPH-3901 +HDD +Noctua NF-A6x25 5V
- Rating
- 5 / 5
- Likes
- 88
- Downloads
- 880
- Makes
- 3
- Views
- 7,313
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution
Edit from April 24th 2023
Per request, I've added holes which “should” work with SCPH-3000x
I don't have any other model on hands than my 39000 so do it at your own risk.
I'm keeping the old ones working on 39000 for now.
---------------------------------------------------------------------
Here's a mod to replace the fan of a PS2 FAT SCPH-3X000
You can use fans from 50x10mm up to 60x25mm.
The 25mm one needs to print the two parts, the “grid” is sliding in a similar way the original fan does.
Fixing the fan by using the 7/32" standard PC fan screws .
---------------------------------------------------------------------
Printing:
I've tried to mange overhangs as best as I could but some might be troublesome, especially the “gutter” for sliding the AC switch/plug part. Don't go crazy on density.
---------------------------------------------------------------------
I STRONGLY SUGGEST YOU TO USE A 5V FAN since the Playstation 2 original fan is 7V (only spin at full speed with an HDD plugged).
You can make your own adapter with:
- a MICRO JST SH 2pin (1.0 mm)
- a 10ohms 1W resistor (to drop voltage from 7v to 5v at full speed)
- PC Fan connector, like https://www.amazon.ca/dp/B09SDWD1RC you can also salvage one if you are using a Noctua.
If you are using a 12v, it will spin, but only half its speed and may not be up to original one as moving air.
-----------------------------------------------------------------------
Tested on a SCPH-3900 +HDD +Noctua NF-A6x25 5V, printed in PETG