1 / 4
Suovol SV06 Part Cooler
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is my Part Cooler for the Sovol SV06.
Mounted on the back of X-Rail. so there is a free sight on the nozzle.
Works with the Stock Fan , yes Cable is barley long enough.
You will need will need 2 Heat-Sink-Nuts for the Fan and 4 Screws for the Unit to mount on the backside of the Extruder-Unit.
Feel free to use it.
BUT BE WARNED !!!
Use screws with real real flat heads , otherwise the scratch on the X-Boom while homeing !
I tested sucessfully, but do not use it , cause the Fan Power of the Stock Fan is too low so there is way to low Part-Cooling.
I happy with that one , to bad its not my design ;-)