Suovol SV06 Part Cooler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Part-Cooler for Stock Fan . Im NOT useing it !
- Rating
- 3 / 5
- Likes
- 15
- Downloads
- 56
- Makes
- 0
- Views
- 1,399
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is my Part Cooler for the Sovol SV06.
Mounted on the back of X-Rail. so there is a free sight on the nozzle.
Works with the Stock Fan , yes Cable is barley long enough.
You will need will need 2 Heat-Sink-Nuts for the Fan and 4 Screws for the Unit to mount on the backside of the Extruder-Unit.
Feel free to use it.
BUT BE WARNED !!!
Use screws with real real flat heads , otherwise the scratch on the X-Boom while homeing !
I tested sucessfully, but do not use it , cause the Fan Power of the Stock Fan is too low so there is way to low Part-Cooling.
I happy with that one , to bad its not my design ;-)