Mx5 NA miata sunvisor delete plate with led
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a design that covers the sunvisor holes perfectly with the stock screws. it uses the "angel eye" type of led…
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 167
- Wydruki
- 1
- Wyświetlenia
- 1538
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a design that covers the sunvisor holes perfectly with the stock screws.
it uses the "angel eye" type of led that are easily found on amazon by searching "12V 18mm led".
(ex: https://www.amazon.it/gp/product/B01N4M9CB6/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 )
You will need to extend the original wires and be carefull to not pinch those flimsy cables and short them out after mounting the bracket. ask how i know :/
After soldering the cables to the exisiting light you will be able to see something when you go back to the car at night.
i printed them in PETG and this version allows you to replace the bulb or the mount indipendently without having to remove the whole thing.
Let me know if you have any suggestions :)
Category: Automotive