Deebot X1 Omni Sink filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement sinkfilter for Deebot Omni X1 Sink. This is the filter that is placed in the back to prevent debree.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 2001
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a drop in replacement for the Deebot Omni X1 station sink. This is the part that sits in the back of the sink and prevents the dirty water pump from sucking up debree. I intent to put some fine mosquitto net on the inside of this print to prevent the pump from blocking.
Print instructions
Because of the fine tooth, you need to print with a brim and you can draw support through the center of the model from the front to the back. At the back it needs some support aswell. I used the paint support option.