FLsun SR Sherpa Phaetus Dragon Mount with 5015 fans
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update 10.11.2022: Now the fan has two fixing spots and also its a bit better positioned. Also the airflow of the…
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 172
- Wydruki
- 0
- Wyświetlenia
- 1312
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Update 10.11.2022: Now the fan has two fixing spots and also its a bit better positioned. Also the airflow of the heatbreak fan is optimized.
Hi,
i builded my own adapter for a sherpa extruder with an phaetus hotend because i could not find anything suitable for my FLsun SR. The airflow of the 5015 fans is really high, so i only let them run at 80% with PLA in normal printing speed (100mm/s).
You will also need:
4x M3 heatsink inserts
Some screws.
I also uploaded the Fusion360 data so you can edit as you prefer and want to.
This is just ready and i tried only a bit - update will follow if needed.
Print Settings
Printer:
Voron 2.4
Rafts:
No
Supports:
Yes
Resolution:
0,2
Infill:
20%
Filament:
any Petgany
Notes:
Just printed :)
Category: 3D Printer Parts