1 / 15
Mantis XOL 2 - for Bambu Lab hotend with 25mm or 30mm fan — zdjęcie 1
1 / 15

Mantis XOL 2 - for Bambu Lab hotend with 25mm or 30mm fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I have created a new carriage for the Mantis XOL 2 printhead to use a Bambu Lab hotend.

Ocena
0 / 5
Polubienia
25
Pobrania
150
Wydruki
0
Wyświetlenia
2562
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

I have created a new carriage for the Mantis XOL 2 printhead to use a Bambu Lab hotend.

I also modded the faceplate to use a 25mm fan or 30mm fan with led mount. There is also an ADXL mount for the faceplate included.  

You can use the original fan of the Bambu Lab including the screws, heater and thermistor for this MOD or you can use a 30mm fan. Unfortunately I do not know the designation of the connectors of the fan and the thermistor, so I have extended and soldered these cables. However, a use plug and play should also be possible.

The step files are included in my GitHub 

https://github.com/PrintStructor/Mantis-Xol

Tagi