1 / 2
Michelangelo's Vaporwave Bubble Gum David (NOW WITH SUNGLASSES!)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Classic, Sleek Vaporwave Aesthetic Staple Comes To Your Keyboard To Keep You Cool As A Cucumber
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 725
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
Printed on an Ender 3 Pro with Supports in Polymaker Polylite Natural PLA with Nailpolish Paints. This would probably turn out even better on a SLA printer than on a FDM, but I don't have one.
Settings (time = 4 hr 10 min)
- Layer Height - 0.1
- Wall Count - 5
- Top Surface Layers - 1
- Infill Density - 50%
- Infill Pattern - Cubic Subdivision
- Temp - 200 C
- Build Plate - 50 C
- Speed - 45 mm/s
- Supports Line Distance - 3.0
- Support Z Distance - 0.3
- Use Adaptive Layers - On