Click-Together 1U Spacer (Gravitrax compatible) (Rapid-Print)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1U spacer for marble coasters, which have a locking feature and print in 30 min.
- Ocena
- 4,875 / 5
- Polubienia
- 48
- Pobrania
- 402
- Wydruki
- 9
- Wyświetlenia
- 1324
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
So I was getting tired of these spacer blocks just coming apart wile building, so I decided to integrate a locking click-feature to make sure they stay together.
By having the locking feature the printing tolerances and choice of material no longer become that critical.
I also tried to use as little material as possible to ensure a quick print. Currently, one tile requires around 30 min.
Additional, there is a slot in the side so you can use a butter knife to separate them if they are too tight.
Note: First print two of them to see how they click together to one another and to your existing spacers. Adjust the size in the slicer accordingly if needed.