DJI Goggles 2 lens cover (with diopters on)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lens cover replacement for the DJI goggles 2 with diopters
- Ocena
- 1 / 5
- Polubienia
- 7
- Pobrania
- 142
- Wydruki
- 1
- Wyświetlenia
- 820
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
The DJI goggles 2 comes with a lens protector, which didn't fit in my goggles after I change the foam to a softer one and added diopters. I therefore created a simple lens cover that worked well with the new foam on the goggles.
It can act as a replacement if you lose the original if you are using diopters, or it could work for when you replace the foam as I did.
The print is done assuming you have diopters on. If you need one without diopters just look in my profile.
Print in TPU, flat side down, and it's such a simple design that you don't even need to print slowly.