1 / 6
Bestagon Modular Pen/Pencil Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular Hexagon Pen and Pencil Storage item that's stackable.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 421
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remodeled my office and needed to move all my pens to a different holder. Decided to make my own and liked this slanted hex design.
The slant is 15-degrees off the flat of the base and so is the rest of the stacked slots. For me that's enough to prevent stuff from sliding out.
- In the pictures, I have the full base printed and examples of each of the storage hexes.
- If you don't want the little tabs on the storage hexes, you can slice them off in the slicer.
- I print the vase mode versions at 0.2 layer height and with 10 bottom layers.
- I've printed them at 0.24 and 0.28 successfully as well
- My prints are all done on the BambulabX1 Carbon.
- I've done a test print on my Prusa mini and the tolerances may need to be adjusted for that, if anyone does and lets me know, I can increase them.