1 / 2
Handle for keyless drill chuck 0,3-3mm hex 1/4" shaft
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handle for keyless drill chuck 0,3-3mm hex 1/4" shaft
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 76
- Wydruki
- 1
- Wyświetlenia
- 508
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (1)Kolekcje (21)Powiązane
Handle for keyless drill chuck 0,3-3mm hex 1/4" shaft
To secure chuck in handle 2x M3x10mm socket head screws are needed.
Holes for M3 screw should be tappered by M3 tap before screws are inserted.
Material: PLA, PET-G etc.
Layer high: 0,2 or lower
No supports needed.