Polycarbonate Light Shade for Overhead Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed and printed this light shade replacement in PC using 1 perimeter & spiral vase option.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 308
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Public Domain
Two 3mf & STL files each included for the Light Shade body and Top. The body is printed with 1 perimeter using the spiral vase option, but that makes the top too flimsy for supporting the screw pressure when assembling in the Fan base. So, I made a separate more robust Top piece, cut off the flimsy Top, and then glued the more robust Top in place. It works fine. The Shade has 5 spirals to match my 5-bladed fan, if that matters. I used PC material to resist any heat buildup, and also use CFL bulbs which stay fairly cool. You can print both pieces and saw off the old top.