1 / 5
Case for OpenDTU/AhoyDTU (for 38 pin ESP32 NodeMCU)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple case for an ESP32-WROOM-32 (38-pin, 28x55mm) NodeMCU Dev board with NRF24L01+ antenna board.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 327
- Wydruki
- 1
- Wyświetlenia
- 2768
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 7)Remiksy (0)Kolekcje (36)Powiązane
Simple case for an ESP32-WROOM-32 (38-pin, 28x55mm) NodeMCU Dev board with NRF24L01+ antenna board.
Prints without support.
NRF24L01+ module stay in place once antenna has been screwed on.
I used a bit of blu-tack to keep the ESP32 in place.
(My tip for all, who cannot get a connection to the Hoymiles inverter → try different power supplies/USB cables… it took me 3 days of flashing and checking my wiring until it finally worked. And don't expect to get a connection at night :-)