1 / 4
Lens Hood Tamron A17 70-300mm (DA17) — zdjęcie 1
1 / 4

Lens Hood Tamron A17 70-300mm (DA17)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This lens hood fits a Tamron 70-300mm tele-macro lens. Designed from reference pictures.

Ocena
0 / 5
Polubienia
15
Pobrania
215
Wydruki
0
Wyświetlenia
1034
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution

This is a lens hood for a Tamron A17 (ref. DA17), 70-300mm lens with Macro mode.
I bought a camera that came with this lens, and didn’t come with the hood, so I designed one in Fusion 360.
I designed it from scratch, as I didn’t find any dimensions online. I designed it from reference pictures, especially for the length, as I wanted to avoid vignetting. This was achieved.
Might be a little tight, so I recommend a slight sanding of the engagement ring
The hood can be installed with the lens cap on.
I recommend printing it in a opaque filament, and painting it with a mate black paint. It works fine without but might improve its performance.
If useful for a remix, the lens filter diameter is 62mm.

Tagi