1 / 5
Pixel heart standing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Standing 8-bit pixel heart, to show your retro love ;-)
- Ocena
- 4 / 5
- Polubienia
- 44
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 825
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (49)Powiązane
A free standing pixel heart, inspired by retro 8-bit pixel art.
The pixels are 10x10mm, the heart is about 115x30x115mm
It would be nice to put a light in it, but the model would probably need some adaptations, maybe a thinner shell (The picture was just made with a flashlight shining through).
I also made a version as a box: https://www.printables.com/model/395826-pixel-heart-box
Printing:
- You need to print 1 of the stand, 2 of part A and 2 of part B.
- All parts can be printed without supports: print upside down. Good bed adhesion is required, as the ‘pixels’ are printed seperately on the first layers.
- I printed in PETG, 0.4 nozzle and 0.65mm extrusion width.
- Wall thickness is 1.2mm, this can print with 2 perimeters.
The parts can be glued together, although it seems to hold together pretty well as is.