Latch hook using knitting machine needle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple latch hook made by inserting a common knitting machine needle
- Ocena
- 4,8 / 5
- Polubienia
- 95
- Pobrania
- 260
- Wydruki
- 5
- Wyświetlenia
- 1478
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Background
I made the very popular Circular Sock Machine (available on this site) but had no experience actually knitting. I started trying to make socks but realized I didn't have a latch hook. I was using the latching knitting machine needles temporarily but needed something more convenient.
Print Settings
Tested with PLA but PETG/ABS/ASA should be OK. Tolerances are made for FDM, so if you print using resin, the needle may be a little too loose.
0.4mm nozzle
0.2mm layer height
Brim recommended but I was successful printing without it
Assembly
Simply insert an uncut machine knitting machine needle into the holder. Apply a dab of glue to help keep it firmly in place. It should be press fit and a little tight.
I did not test with a cut needle as I was worried it would fall out easily.
Parts Requied
- 1 Knitting machine needle (KR850 needle, available on Amazon/Aliexpress)
- Printed part