Latch hook using knitting machine needle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple latch hook made by inserting a common knitting machine needle
- Rating
- 4.8 / 5
- Likes
- 95
- Downloads
- 260
- Makes
- 5
- Views
- 1,478
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Background
I made the very popular Circular Sock Machine (available on this site) but had no experience actually knitting. I started trying to make socks but realized I didn't have a latch hook. I was using the latching knitting machine needles temporarily but needed something more convenient.
Print Settings
Tested with PLA but PETG/ABS/ASA should be OK. Tolerances are made for FDM, so if you print using resin, the needle may be a little too loose.
0.4mm nozzle
0.2mm layer height
Brim recommended but I was successful printing without it
Assembly
Simply insert an uncut machine knitting machine needle into the holder. Apply a dab of glue to help keep it firmly in place. It should be press fit and a little tight.
I did not test with a cut needle as I was worried it would fall out easily.
Parts Requied
- 1 Knitting machine needle (KR850 needle, available on Amazon/Aliexpress)
- Printed part