1 / 3
LED 12 V + Fan PWM Electronics and Switches | IKEA PLATSA Build
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Switch on/off the LED Strip and Fan, controll the PWM speed
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this housing for the electronics of my enclosure. Inside are 2 switches, the PWM Controll for the Fan and the wireing.
You need:
- WAGO 221 clamps for at least 3 wires (or any other suitable wireclamps)
- Switches
- 28,7mm width
- 16 mm highth
- 12 mm Screw diameter
- i used those
- PWM Controll board
- on amazon are a few versions of this board with the same measurements, just search forPWM 12V Controll board
- i used this
- Powersupply
- 12v
- with DC adapter, i think others will fit to
- i used this
- PWM Fan
- 4 Pin Plug
- LED Stripe
- 12 V ones with out a controller
Please check out the filtration system