G4 RF1 Gasmeter: Holder for QMC5883 compass sensor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple compass sensor holder for G4 RF1 kind of gasmeters with the magnet on the second decimal place.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 525
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a simple compass sensor holder for G4 RF1 kind of gasmeters with the magnet on the second decimal place (i.e. 1 Imp = 0.1m³). In my case it is a Pipersberg Actaris model - from my understanding other G4 RF1 models could be compatible.
This design was created to hold a QMC5883 sensor (roughly 15x14mm dimensions) in place. As those sensors are quite similar to HMC5883, those could work as well.
Known Issues
1) Cover is a bit loose
Project
The corresponding project to track gas consumption with an ESP32 and a QMC5883 can be found on Github: https://github.com/dnoegel/gasmeter-sensor