G4 RF1 Gasmeter: Holder for QMC5883 compass sensor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple compass sensor holder for G4 RF1 kind of gasmeters with the magnet on the second decimal place.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 27
- Makes
- 0
- Views
- 525
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is a simple compass sensor holder for G4 RF1 kind of gasmeters with the magnet on the second decimal place (i.e. 1 Imp = 0.1m³). In my case it is a Pipersberg Actaris model - from my understanding other G4 RF1 models could be compatible.
This design was created to hold a QMC5883 sensor (roughly 15x14mm dimensions) in place. As those sensors are quite similar to HMC5883, those could work as well.
Known Issues
1) Cover is a bit loose
Project
The corresponding project to track gas consumption with an ESP32 and a QMC5883 can be found on Github: https://github.com/dnoegel/gasmeter-sensor