No Leak Hose Mender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made another hose mender and although that one does work I have some cheapo HF hose clamps which end up bending…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I made another hose mender and although that one does work I have some cheapo HF hose clamps which end up bending while I try to tighten down all the way.
This hose mender will fix standard garden hose with 5/8" ID. If needed larger or smaller just use a tool like Cura and re-size entire object proportionately.
Inside hole for water flow is 8mm. The primary "pipe" diameter is 12mm with large bumps at the top and bottom being 14mm.
I printed at 0.3mm mm and 100% infill and brim. I am able to severely tighten down the cheapo HF hose clamps without bending and getting no leaks at all.