WatchWinder | Uhrenbeweger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a very simple Watch Winder. Works with 230V.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 2050
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
It's a very simple Watch Winder. Works with 230V.
Mount is for a cheap synchronous motor with a 49mm diameter and turns with 4 rpm. (ca. 4,- Euro at ebay). The socket I used for the box is a C8 size
The watch winder is controlled by a fritz!DECT200 smart socket. So the watch turns e.g. for 2min an hour.
The holder should fit for watchbands around 20cm
Print instructions
Category: Household Summary
It's a very simple Watch Winder. Works with 230V.
Mount is for a cheap synchronous motor with a 49mm diameter and turns with 4 rpm. (ca. 4,- Euro at ebay). The socket I used for the box is a C8 size
The watch winder is controlled by a fritz!DECT200 smart socket. So the watch turns e.g. for 2min an hour.
The holder should fit for watchbands around 20cm
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Supports: Yes
Resolution: 0.2
Filament: Fillamentum, Extrudr Greentec Pro, ASA black, red
Notes:
Supports are needed for the rotator and the watch holder.