1 / 15
Wall mount for Vinyl with LED Strip — zdjęcie 1
1 / 15

Wall mount for Vinyl with LED Strip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a wall mount for vinyl records with led backlight.

Ocena
0 / 5
Polubienia
36
Pobrania
65
Wydruki
0
Wyświetlenia
1111
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Public Domain

This is a wall mount for vinyl records with led backlight.

You Need:

3x: M3 Thread inserts : https://www.amazon.de/gp/product/B08BCSSKY1/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1v

3x: M3x10mm Screws
1x Arduino Nano: https://www.amazon.de/Moligh-doll-Atmega328-Kontroller-Arduino/dp/B07QMPPHPT/ref=sr_1_2?__mk_de_DE=ÅMÅŽÕÑ&dchild=1&keywords=Arduino+Nano&qid=1598786207&s=diy&sr=1-2

3x Cable for for connecting led strip to board: https://www.amazon.de/Wheate-120-Pcs-Colourful-Breadboard-Arduino/dp/B06XD8NBTZ/ref=sr_1_6?__mk_de_DE=ÅMÅŽÕÑ&dchild=1&keywords=Arduino+kabel&qid=1598786254&s=diy&sr=1-6

30cm LED Strip: https://www.amazon.de/gp/product/B07JBYZRWD/ref=ox_sc_act_image_2?smid=A29559WHI6ZTR8&psc=1

1x Screw for the Wall (4x40 Spax)

3D Printed Parts:

1x Nut
1x Main Part
1x Wall Part

For the code you can use the Adafruit NeoPixel Strandtest library on the Arduino IDE.
But you also can use an other LED stip for this.

Print instructions

Use PLA
15% infill
Support: only at Main Part
Layrs high: 0.15mm