1 / 15
Wall mount for Vinyl with LED Strip — image 1
1 / 15

Wall mount for Vinyl with LED Strip

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a wall mount for vinyl records with led backlight.

Rating
0 / 5
Likes
36
Downloads
65
Makes
0
Views
1,111
Reviews
0

Updated at source:

Model information

Category
Wall-mounted
License
Creative Commons — Public Domain

This is a wall mount for vinyl records with led backlight.

You Need:

3x: M3 Thread inserts : https://www.amazon.de/gp/product/B08BCSSKY1/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1v

3x: M3x10mm Screws
1x Arduino Nano: https://www.amazon.de/Moligh-doll-Atmega328-Kontroller-Arduino/dp/B07QMPPHPT/ref=sr_1_2?__mk_de_DE=ÅMÅŽÕÑ&dchild=1&keywords=Arduino+Nano&qid=1598786207&s=diy&sr=1-2

3x Cable for for connecting led strip to board: https://www.amazon.de/Wheate-120-Pcs-Colourful-Breadboard-Arduino/dp/B06XD8NBTZ/ref=sr_1_6?__mk_de_DE=ÅMÅŽÕÑ&dchild=1&keywords=Arduino+kabel&qid=1598786254&s=diy&sr=1-6

30cm LED Strip: https://www.amazon.de/gp/product/B07JBYZRWD/ref=ox_sc_act_image_2?smid=A29559WHI6ZTR8&psc=1

1x Screw for the Wall (4x40 Spax)

3D Printed Parts:

1x Nut
1x Main Part
1x Wall Part

For the code you can use the Adafruit NeoPixel Strandtest library on the Arduino IDE.
But you also can use an other LED stip for this.

Print instructions

Use PLA
15% infill
Support: only at Main Part
Layrs high: 0.15mm