Tarmo5 Enclosed Gearbox - V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My Tarmo5 Gear Box was getting full of dirt and grass so I came up with a way to close up the openings.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 205
- Wydruki
- 5
- Wyświetlenia
- 2249
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
My Tarmo5 gearbox was filling up with dirt and grass so I tried to close up some of the openings. My first version vibrated enough to loosen the motor screws. So I added a bearing and at the suggestion of “Liouma”, I added a flexible motor coupling.
You will need 1 additional 24x15x5 bearing, and 3 - M2.5 x 8mm socket head screws to attach the hex adapter to the motor. The motor coupling should be printed with TPU-95. I used 3 walls and 50% infill. The dampener ring should be in PLA or Nylon and then glued to the motor coupling. I used Nylon for the gears but that may not be necessary. Also included is a gearbox where the 1mm thick bottom section is now 3mm thick since my first one buckled. And just for good measure, I threw in a Back Bumper. :)
Let me know how it works for you and as always… Thanks, Kris, for sharing this great project!