Tarmo5 Enclosed Gearbox - V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My Tarmo5 Gear Box was getting full of dirt and grass so I came up with a way to close up the openings.
- Rating
- 5 / 5
- Likes
- 42
- Downloads
- 205
- Makes
- 5
- Views
- 2,249
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
My Tarmo5 gearbox was filling up with dirt and grass so I tried to close up some of the openings. My first version vibrated enough to loosen the motor screws. So I added a bearing and at the suggestion of “Liouma”, I added a flexible motor coupling.
You will need 1 additional 24x15x5 bearing, and 3 - M2.5 x 8mm socket head screws to attach the hex adapter to the motor. The motor coupling should be printed with TPU-95. I used 3 walls and 50% infill. The dampener ring should be in PLA or Nylon and then glued to the motor coupling. I used Nylon for the gears but that may not be necessary. Also included is a gearbox where the 1mm thick bottom section is now 3mm thick since my first one buckled. And just for good measure, I threw in a Back Bumper. :)
Let me know how it works for you and as always… Thanks, Kris, for sharing this great project!