Firestarter Gift Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An insert for an Altoids-style tin to hold fire-starting materials such as a ferro rod, striker, matches, and tinder.
- Ocena
- 0 / 5
- Polubienia
- 115
- Pobrania
- 178
- Wydruki
- 0
- Wyświetlenia
- 1274
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model functions as an insert in an Altoids-style tin to hold fire-starting materials. I designed it as a gift for Cub Scouts who were “crossing over” into Scouts BSA.
The insert will fit in a tin that is approximately 95 x 62 x 20 mm/ 3.75 x2.45 x 0.9 inches (L x W x H). The insert will then hold the following items (Amazon affiliate links included to the specific items I purchased):
- Ferrocerium (Ferro) Rod - West Lake Tactical 5/16" DIY Ferrocerium (Ferro) Rod
- Striker/Scraper - 3 in 1 Black Ferro Rod Scraper
- Matches - UCO Survival Waterproof Fire Starter Matches
- Match Striker - (Included with matches above)
- Tinder - Tinder-Quik Fire Tab
The insert is labeled with the Scout Motto, “Be Prepared”, in the upper-right corner.
The tins I used were the Tamicy Metal Rectangular Empty Hinged Tins, but I believe a standard Altoids tin would work.
To be clear, this is more of a “designer” fire-starting kit intended to be used as a neat gift for Scouts. You can hold quite a bit more in a small tin if you don't use an insert like this.
I printed the model in Galaxy Silver Prusament PLA with 15% infill and a 0.15mm layer height.