1 / 3
phone charging shelf for power outlet (europe) f3d.file
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small shelf, mountable on european standart power Outlets. 195mm x 78mm (no supports needed if placed right)
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 72
- Wydruki
- 1
- Wyświetlenia
- 774
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (12)Powiązane
I recomend to print it with as little Infil as posibble, since
it doesn't have to take a lot of weight and the geometry is rigid.
With 2 holes in the middle for smartwatches.
For mountig just replace the outer cover of your existing poweroutlet,
BE CAREFULL with electricity, installion time about 2 Minutes