1 / 3
SD Card storage looks like a 35mm film container
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Will hold 3 SD cards and 4 micro cards. The exterior size and shape is patterned after a 35mm film container
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 477
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
SD Card storage looks like a 35mm film container. Will hold 3 SD cards and 4 micro cards. The exterior size and shape is patterned after a 35mm film container. The photo show it printed in black and grey to match the original film canisters. I changed filament to yellow on the top of the main body to better see the stored SD cards. Printed in PLA with the optional gasket printed in TPU. I did find that if the ironing option is used it makes the cap a little harder to screw on.