Cordless screwdriver Parkside PBSA 12V D4 - motor casing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple case for the motor of the Parkside PBSA 12V screwdriver motor. I used them as a cheap motor for a…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 689
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a simple case for the motor of the Parkside PBSA 12V screwdriver motor. I used them as a cheap motor for a ball screw.
The clutch of the motor has to be turned to the "drill" position before the case can be closed.
I added the motor STL as reference.
Print Settings
Printer Brand:
Anycubic
Printer:
Kossel
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25
Filament: unknown PLA Post-Printing =============
The tolerances are very tight. So be careful when you fit the motor into the case. It might be necessary to rework some of the inner faces for a better fit, but this depends on the motor itself.
Category: DIY