Cordless screwdriver Parkside PBSA 12V D4 - motor casing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple case for the motor of the Parkside PBSA 12V screwdriver motor. I used them as a cheap motor for a…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 58
- Makes
- 0
- Views
- 689
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is a simple case for the motor of the Parkside PBSA 12V screwdriver motor. I used them as a cheap motor for a ball screw.
The clutch of the motor has to be turned to the "drill" position before the case can be closed.
I added the motor STL as reference.
Print Settings
Printer Brand:
Anycubic
Printer:
Kossel
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25
Filament: unknown PLA Post-Printing =============
The tolerances are very tight. So be careful when you fit the motor into the case. It might be necessary to rework some of the inner faces for a better fit, but this depends on the motor itself.
Category: DIY