Atomic Hawx Prime Skiboot replacement soles / sole pads
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sole replacements for Atomic Hawx Skiboots size L (from 2018 models onwards).
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 68
- Wydruki
- 1
- Wyświetlenia
- 573
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Creative Commons — Attribution
I created my own sole replacements for my Atomic Hawx Prime skiboots as the original ones don't tend to last very long for me. These soles should work for all Atomic Hawx boots from 2018 onwards and with sole-lengths between 250mm and 330mm which Atomic calls size “L”.
This should print fine with PLA, PLA+ and PETG. I would recommend to use > 50% infill. I haven't tried yet to print it with TPU but hard TPU like 95A should also work. Don't know about supports.
You will likely need support structures for the slant and the holes. On my Prusa printer I didn't need supports around the logo and the frame around the logo. Removing support material from the sole grid is a PITA but you will likely need some grid to avoid slipping.
Hope you will find these soles as useful as I do.
The soles have been created with FreeCAD.