Liczymy pasujące modele…
Update 2025/11/16: Inland and Esun have updated their refill spools, so this spool is no longer compatible. A reusable filament spool designed to work with Inland brand filament refill packs. The two halves screw together.…
Fully 3d printed slide shoes , remixed from MakerVerse Designs printed with TPU (I used eSun eTPU-95A Rainbow ) probably TPU 90a or so is more comfortable, but also more difficult to print My print settings: Infill: 10% Infill Pattern:…
Organizer tray for the refresh style center console. Has the ability to slide back and forth within the console to allow access to the lower parts of the console. Has a cutout for a usb cable so you can charge your phone in the tray as…
Shoe insoles incase yours arent cutting it, are damaged, or lack breathability etc.
Fashionably late as always , so rev up those printers cause you got plenty more printing to do for the local guisers/trick-or-treaters! No character this year, but instead a wee stone Mausoleum surrounded by a few equally cute little…
Bonjour, Pour mon bain de soleil, afin de remplacer un axe et des clips qui, avec le temps, se sont cassés, j'ai recrée ces 2 éléments. Couches : 0.3mm remplissage : 70% Matière : ABS (mais possible en PETG prusament), Avec bordures et…
external micro antenna mount for uconsole
Center console tray for Tesla Model Y Juniper - might also fit the Model 3 Highland. More pictures coming up. Print it in 0.30 PETG without support. There is a slight overhang on the “wings”. My Prusa handled it fine.
The IONIQ 5 is a great car (in about every aspect that matters to me), but there is one little thing that is a bit annoying: It only features a single USB data port combined with the need of using a dongle for wireless Android Auto /…
New version 2.0 Printing The crankcase is printed with support on build plate. Print the piston pins with brim. I printed with PLA+, layer height 0.16 mm. Dimensions 70 x 68 x 50 mm. Weight 0.050 kg. Assembly - Build the crankshaft using…
There are three different trays, respectively a lower tray for the front compartment, an upper sliding tray for the front compartments and lastly an upper tray for the rear compartment under the armrest. Remember to print the models in…
📦 Don't have a printer ? I'll print one for you → Order on Etsy • More at BlankLemur3D 👉 Rivian R2 Owners: Check out the Rivian R2 Version now available! 🔗 MakerWorld : This model is also available on MakerWorld 🎁 Rivian Rewards : Use…
Front bezel and rear case for the 10.1" Raspberry Pi touchscreen sold by pidisplayconsole.com and other similar units. I have seen others that look identical but I don't know brand names. I printed this using Hatchbox PLA on the Bambu X1C…
Thx @ @neyth_makes_106416 Du hast mich inspiriert diesen Playstation 5 Konsole seitlicher Controller Halter etwas umzugestalten You inspired me to redesign this Playstation 5 console side controller holder a bit
New updated version with more controller support now available here: ULTIMATE MODULAR GAME CONTROLLER ORGANIZER by Replicrafts | Printables Store This is a set of modular controller stands for multiple game consoles. Current set includes…
I needed 3mm flat inserts for a pair of boots to fill space under other third-party insoles. I made these and sized them to match the original inserts. Paired with the new insoles, the boots are a great fit. Now that I've started this, I…
Clip on screen for uConsole by ClockworkPi. Prints with no supports with flat against build plate.
This model is originally from Tingiverse, made by Printer2261 also known as Shane Jackson. https://www.thingiverse.com/thing:5172136 But I thought that users of printables would also like to be able to print this, since the Tesla Model Y…
Changes from Original: Nintendo GameBoy/GameBoy Color/GameBoy Advance: - Thicker Bottom: ~1.4mm Nintendo Entertainment System: - Thicker Bottom: ~1.4mm Super Nintendo Entertainment System (NTSC): - Thicker Bottom: ~1.4mm Super Nintendo…
**Update 2-Mar-2023:** Added 1" barrel NP5K Files. **Update 12-Jan-2023:** Added Gryphon 1.3 compatible files for solenoid and manual, which should be easier to assemble. Also added select-fire wiring diagram. This will likely be the…
This is the 2022 version 5 of the MiSTer Multisystem enclosure. For printing the enclosure, please read the included PDF - how to print guide. Multisystem is brought to you by Heber ltd and RMC Retro. If you have any technical questions…
Cupra Born has some big trays to store things. But it is difficult to organize cards, pens, coins for shopping carts etc. So I first tried the model of Sven Van Opstal at Thingiverse to insert in one of the cup holders. In my case it had…
Źródło oznaczyło ten model jako treść 18+.
Updated my Darth Fader to fit on the Behringer X32 console, Requires Supports just under the fader overhangs.
It does what is says.
An universal stand for handheld consoles PSP, Vita, DS, DSi, WonderSwan, CD, DVD, Famicom disks... I balanced it to be very stable and most handhelds consoles should fit, and many other things…
This is the core 2x2 modular dungeon tile from my Masterful Dungeon tiles system. Each tile features a reusable base and a swappable top. The tile is designed for either magnets (5x2 mm neodymium) or clip connectors. Use it to build…
The original version was genius, but had too sharp of edges for me so I added fillets to smooth them out.
Just a simple insole that you can shrink or grow to work in just about any shoe. This TPU printed insole is for my Shimano XC3 Mountain Bike shoes for a little extra cushion. Insole is 5mm thick and made for size 45s (10.5). If you need a…
Eternal insole, which you can adjust to size in the slicer. (the use of TPU filament is recommended) Örökéletű talpbetét, amelyet a szeletelőben méretre szabhatsz.(javasolt a TPU filament használata)
Einlegesohle, Schuh Erhöhung, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, Größe 42 Gedruckt in TPU, kann natürlich auf andere Größen skaliert werden. ----------- Insole, shoe elevation, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, size 42…
A family member wanted an adapter for their cup holder so that it could hold their 14 oz Yeti Rambler and its hot coffee safe during their morning commute. A lot of the existing designs did not allow for printing without supports or…
Please note that a revised Version V5 (2022) of this enclosure is also available on Printables Here - MiSTer Multisystem V5 2022 classic gaming console 3D Printed enclosure design by Multisystem | Download free STL model | Printables.com…
Star Wars Data Console Switch Plate Sci-Fi Switch Plate.
Welcome to the Solenoid Gryphon Blaster Project This project is a remix of the original Gryphon made by Flygonial https://github.com/Flygonial/The-Gryphon-Foam-Dart-Blaster Project originally started by Taffy and Ciela in Fusion 360 and…
Hey hello. I made a shroud for the uConsole. Loved the looks of shroud. And here it is. What you need: a Printer (lol) 4 longer screws. I used this M4x6 ones ( Link to AliExpress ) Print settings: You use you prefered settings and speeds.…
EDIT 2022-07-17: I've made a new, improved version of this. Consider this obsolete. New model: https://www.printables.com/model/243613-battery-adapter-einhell-power-x-change-general-pur I altered the original thing so that i can use…
Adds features for charging cards, ball pens and shopping cart chips to the center console divider of the VW ID.4 and ID.5. Fits for 1 Euro coins. If you need a different coin dimension, please contact me. You can print it in dual color to…
Printable drawer for bottom cubby in 5th-Gen 4Runner center console. Supports recommended for the pull handle only Recommend adhesive-backed felt on the bottom and rear corners for best fit. RAM ball variant available here:…
These are the soles of a pair of shoes that could be used to make a pair of shoes as I am intending on doing. Although I haven't made anything with them yet, as soon as my TPU flex filament arrives I am going to start printing on my…
Features: 2 Front mount USB ports Front mounted microSD card slot Console style power switch (loosely modeled after the PCEngine and TG16) Internal SATA HD easily accessible from the rear HDMI port Ethernet 3 more USB in the rear Serial…
This is a remix of the fader knob that I met here, since the original model was not suitable for mass printing, I had to simplify it a little for better adhesion to the 3D printer table and the absence of the need to print with supports.…
center console floor tray vor VW ID.4, printed in ASA w/o support in heated chamber, fits by form (snaps under plastic front console), i personally use it as trash bin
Logitech Driving force H shifter Console to mount to Playseat Challenge. Ends up being a quite nice starting setup for a driving simulator rig. Use PETG with 35% Gyroid infill, and 2pcs M4x30 Screws with washers to mount. 2019.02.20: REV3…
I recommend using the .3mf files. This is a modified version of Binchotan's console hinge from Thingiverse. When I tried his design, it immediately broke due to how thin the walls of the hinge were. I thickened the walls, made the hinge…
This page contains the instructions and files for printing and assembly of the throttle quadrant module. (electronics and other details for the whole unit on main page “ OpenFlightSimConsole base ”) Fusion 360 model is provided for anyone…
Console tray based on zrides' center console design (thingiverse) with the following changes: removable divider radius added to all inner corners for easier dirt & dust removal outlets for usb charging cables added Printed for Tesla Model…
Tray for center console of 2019-2021 Ford Ranger. Tray must be pushed as far back as possible for armrest to close because the armrest has 2 hooks on either corner. Coins are U.S. The 4 holes at the bottom are for holding pens, markers,…
As any Colorado or Canyon truck owner knows, the first must have accessory is a tray/organizer to make the cavernous center console space a little more useful. This tray covers the entire console area for models without the USB charger…
It's a remix of 'zrides' "Tesla Model 3 Center Console Tray -- 2021 I have made my remix a bit longer so that sunglasses fits inside, as well as a wallet next to it. The tray can still be easily pushed back, allowing access to the lower…
uConsole 3D models in OBJ & STEP format (FREE)
***english below*** Ein Organizer für die Mittelkonsole des Tesla Model 3 2024 Highland Das Model beinhaltet ein mal den Organizer selbst und ein Münz-/Kartenfach. Diese zwei Teile können separat oder auch zusammen mit ein mal gedruckt…
UPDATES: 11/01/2024 Added wiring diagram 07/01/2024 V1.1 Update! Different cage geometry featuring dovetail joints to lower.stl, much tighter dart guide to prevent darts folding inside, slots for cable ties, slot for mosfet and arduino…
UPDATES: 18/06/2024 Made the Rear.stl walls slightly thiccer by 0.75mm. Spring guide in the Mag Base.stl is now taller, this will prevent the mag spring from tangling and prevent the follower from going further down than it needs to,…
Introduction A MagSafe shell enclosure to hide charging cables and to create a landing spot for an iPhone in your Volvo center console. Designed for 2016+ Volvos with a roller-close dual cupholder and 12V receptacle recess between driver…
I wasn’t satisfied with the center console trays that you can buy on Amazon/eBay and thought I would make my own that uses more of the available depth and customize it a bit for my needs. The one I did comes with various slots for things,…
A replacement insole for your footwear. If you're like me, you wear through you're insole long before that leather boot. Size 12 Imperial so scale to preference in your slicer. Print in TPU
A lovely tray for your Tesla Model 3 or Y center console, as long as it has the newer 2021+ console with the integrated Qi charger. Tucks away completely, and covers the contents below when open. Deep enough for larger phones, it even has…
beefygrip.com Purchase a high quality ABS print (with felt lining installed!) from me, the designer to support this project. (US and International shipping!) This is comfy contoured console style grip for the Analogue Pocket handheld. It…
Introducing CouchBuddy, a modular system to have with you when on your couch. Made to hold your TV remove, phone, snacks, drinks, and many more. The modular set up let's you mix and match as much as you would like, so that you can set it…
I really liked this design and found it to be closest to the OEM one that Tesla used to provide for free. However, I found the STL to have some odd artifacts and difficult to paint in PrusaSlicer for a combined PETG+TPU print on my XL.…
I love going on road trips in my Ioniq 5. However, I always face the challenge of not having a good place to store trash during my travels. So, sketched this, fits perfect in the centerconsole. I printed with 0.6mm nozzle and 0.48mm layer…
A remix of the uConsole micro antenna 0.2 mount model for a countersink screw plus a mount for the other corner.
This is a phone mount for Tesla Model 3 or Model Y center screen. It exposes a ball of a 17mm diameter which fits common phone mounts that pivot on balls. But you can add any kind of arm mount by printing a different piece. As the object…
2025-01-26 UPDATE: I received a request to make one without the heated steering button so I added it to the 3MF and I created a new set for RHD vehicles, so there is a new RHD 3MF file, as well as the RHD STL files. 2025-01-25 ADDED A…
This is a fixed flip lid cover for the Clockwork Pi's uConsole pocket computer. You will need longer M4 screws than the ones provided (the thread in the body is deep, you have margin) Print Settings Supports: Yes Notes: The cover needs…
Sliding tray that fits in the center console of Tesla Model Y and Model 3, with 2nd generation center console. The tray can slide forwards to allow easy access the space underneath: To minimize wear on the center console, make sure you…
Features: 3 Front mount USB ports (1 internal for wifi or BT dongle) Left side mounted microSD card slot Console style power switch (loosely modeled after the PCEngine and TG16) HDMI port Serial User port (for SNAC and MT32-Pi) 5v DC…
986 GT3 Center Console Delete The split file is to fit on a Prusa Mk3s Recommend using PETG Must remove orange tabs on the bracket to mount Left enough room to upholster part Fit as one part on Prusa XL. Used PETG with organic supports.…
Dacia Sandero III center console organizer printed from PLA, PETG, ABS, but better is from TPU95A.
Print 4 of these and insert them on the sides of the console. This raises the console 3cm above the surface for improved air circulation and better cooling. (You can use some rubber tape for the bottom of the feet) Remixed form…
Jdsfighter model gave us a great baseline design, but in the Australian version of the IONIQ5, the height of the rear part of the tray meant the cover wouldn't close. So we slightly tapered the design and also adding a few more…
This is a scale update remix which resizes a Tacoma center console insert to fit a Toyota 4Runner Gen5. There are 3 different variations. One is a single tray. Another is the same tray, but with a center divider and coin holder. The last…
Hackergaddets Board Cover Hey hello. Here is a cover for the Hackergadgets antena board. You have the choice between different versions. There is smaller version with SDCard access. And a extended version the covers the slot and power…
I Remixed this design and to make it a bit longer as well as remover the dividers. Fits very nicely in the center console and can slide back so you can still access the storage underneath. Print Settings Printer Brand: Prusa Printer: I3…
Got the idea from here: https://www.printables.com/model/328757-octoprint-console-raspberry-pi-3-b-5-inch-elcrow-t But wanted to make it for 7 inch screen, and a orange pi 5b Its still a work in progress but on first looks it seem to fit…
This is a replacement detent arm for Ford F-150 trucks built from 2009-2014 that shift gears using a floor shifter / console shifter. The original Ford part is very fragile and can easily break when the gear shift assembly is being…
Differences of the remix compared to the original It's slightly deeper (5.7 cm compared to 5 cm) to give more vertical space, yet it can still slide freely. More rounded. 2 versions, one with an indent at the front so it's easier to take…
Mittelkonsole für Suzuki Samurai sj413 mit supports gedruckt auf Ender 3 V3 Plus
Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture…
Originally found from: https://www.thingiverse.com/thing:5393377/files I remixed this design to include a hole to drop items in the rest of the console beneath, without lifting the tray.
This is a lightweight protective armor I designed for my Clockwork Pi uConsole. The enclosure is an exercise in adding additional durability and expansion while trying to maintain the device’s compact and portable nature. The design…
Cup holders for your MK1! This uses the cabriolet style shift boot, kinda. I also made the cup holes a little small, it fits a can tightly. A water bottle will fit, but the tapered mcdonalds cups or anything else probably wont. It's not…
Summary Organizer tray for the arm rest console - adjusted STL with slopes under ledge for less requirement for supports, and gcode file adjusted to fit supports on the Mini+ plate. Note : Print using the gcode file if possible (using…
UPDATES: 19/09/2026 Updates pushers, now slimmer to help them stop striking the dart lever. 11/09/2026 New Dart Guides, 2 options created, one with a dart detector switch, another without. Gives way more reliable readings compared to the…
These clip connectors are designed to join any tiles in the Masterful Dungeon Tiles system , offering a stable and magnet-free way to connect your terrain. They slide snugly into the slots on the underside of the tile bases and provide a…
MASE - the MiSTer Attached SATA Enclosure. This purpose designed enclosure houses a SATA to USB adapter and allows you to attach inexpensive and very large capacity 2.5 inch SATA hard drives and SSDs to your MiSTer. Supports 7 and 9.5mm…
I really like the original Neo Geo AES. Unfortunately, I haven't seen too many models of it online, so I grabbed a bunch of reference photos and made this. It's not perfect - I'm well aware of a few problems and oversights. For instance:…
Update to the Multisystem FPGA console enclosure for 2023 - easier for print farm production, quicker using 0.6mm nozzles (recommended) the design is tuned for 0.6mm E3D V6 nozzles on a Prusa i3 MK3/3+/3S+ machine. For construction and…
My center console (underneath the shifter) was a mess and needed something to organize it all. Specifically, I wanted something for coins as they would always get shoved into a cup holder and rattle around. I found some great examples…
These are complete modular wall tiles from my Masterful Dungeon Tiles system. The wall tops are fully compatible with both 2x1 and 2x2 tile bases, giving you maximum flexibility. Whether you're lining a corridor or enclosing a room, the…
Print it upside down so you don’t need any supports, I just kept it right side up for the picture. I printed it in Pa6-CF at 20% gyroid infill. I didn't do PLA because I have heard that PLA melts and warps in hot vehicles overtime. About…
This is the inner bracket for the switches in the center console with four window switches, two heated seat buttons, and a rear window lockout button. The outer trim panel has already been created by Hyta and can be found here:…
This center console insert tray gives an OEM look to the Enhauto S3XY buttons. The example in the photo was printed (with organic supports) in black PETG then sanded and finished with a matte clear coat for a perfect match to the black…
Replacement sole pad for the Nordica B7 ski boots. Added also Fusion360 source file, if you would need to adapt a little bit… Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Supports: Yes Resolution: 0.2 Infill: 40%…
Was a bit nervous about the proximity of the AC1200 board with the solder points for the battery so designed this holder to ease my nerves.
GERMAN: Mein Jeep Avenger sollte einen Deckel in der Mittelkonsole haben, welcher aber aufgrund eines Lieferengpasses zum Liefertermin noch nicht vorrätig war. Deshalb habe ich mit Tinkercad ein wenig gebastelt und designed und diesen…
Designed a computer console similar to Meatthermometer's consoles, especially this one , as a personal challenge and learning experience. I designed it laying on its back, but I decided to print it standing upright for the extra detail…
OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for little to no…
Adds features for charging cards, ball pens and shopping cart chips to the center console divider of the VW ID.3. Fits for 1 Euro coins. If you need a different coin dimension, please contact me. Update 28.11.2025: I added a second…
![[Obsolete, see description] Battery Adapter Einhell Power X-Change General Purpose](https://media.printables.com/media/prints/98138/images/995211_146f8637-c194-46c0-8805-e848ebb6f784/50b86a246f04e58914ef95d404af139e_display_large_98.jpg)
