Shoe Insole - Simple
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU insole for my Shimano XC3 Mountain Bike shoes for a little extra cushion. Insole is 5mm thick and size 45s (10.5)
- Ocena
- 5 / 5
- Polubienia
- 63
- Pobrania
- 780
- Wydruki
- 4
- Wyświetlenia
- 4830
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
Just a simple insole that you can shrink or grow to work in just about any shoe.
This TPU printed insole is for my Shimano XC3 Mountain Bike shoes for a little extra cushion. Insole is 5mm thick and made for size 45s (10.5). If you need a bigger or smaller size, just adjust in your slicer
I actually printed it at 4mm height instead of 5mm. Just set that in your slicer. I used 20% infill, 2 walls, 2 top layers, 2 bottom layers, and it feels good to me. You can play with different infill patterns to provide different levels of support as well. I used cubic for these.
If it works for you, please leave a like.