Elecrow 7 inch screen console
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Console for 7 inch screen and orange pi 5b
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 447
- Wydruki
- 1
- Wyświetlenia
- 3318
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Got the idea from here:
https://www.printables.com/model/328757-octoprint-console-raspberry-pi-3-b-5-inch-elcrow-t
But wanted to make it for 7 inch screen, and a orange pi 5b
Its still a work in progress but on first looks it seem to fit
I will use thread inserts to mount the orange pi. The switch on the right hand side will be for the screen back light toggle because I want to be able to control that still if it is mounted.
PS: Please be nice it is my first upload and I'm not a real engineer.
If any body is interested I can make a raspberry pi design as well.
Update:
i changed the spacers for the thread inserts to create more room for the threat inserts.
per request i added a raspberry pi 4 variant. i created this with a friction fit because the holes around the gpio headers don't have a lot of flat PCB to create a base for threat inserts.
the way the raspberry pi is intend to be mounted is gpio top
you probably need a micro HDMI ribbon cable like this. because it may interfere with USB-c or audio
update v2:
i made some minor changes to the orange pi design so it would fit better. also made the change there to the friction fit design i made for the raspberry pi variant.