Samsung A70 Phone Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Soft Bumper Case must be printed in TPU or Flexible material. You will not be able to remove phone otherwise.
- Ocena
- 3 / 5
- Polubienia
- 8
- Pobrania
- 178
- Wydruki
- 2
- Wyświetlenia
- 777
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This case provides good all round protection. It must be printed with soft material. I used PETG on a trial fit and had to cut the phone free to prevent damage to it. The camera window is extended lower to cut down on glare from Led Flash.
I printed my cases on a Highly Modified Ender 5 which has a Creality Sprite Extruder, Gen L board running Klipper. Black case was Overture High Speed TPU. Blue was Priline TPU. all the same print settings.
Normal 0.2 Layer height, 15% infill (gives good cushioning Protection). Supports everywhere.
What ever settings give you good high detail flex prints.