Prusa MINI/MINI+ Z-Top | Electronics Box Cover, by MaxT (REMIX)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement lid that attaches seamlessly to the MINI/MINI+ electronics box enclosure. Holes on the side.
- Ocena
- 4,833 / 5
- Polubienia
- 53
- Pobrania
- 345
- Wydruki
- 6
- Wyświetlenia
- 1860
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
https://www.buymeacoffee.com/maxt
----------------------
What?
The Z-Top is an alternative lid design for the electronics box enclosure, which attaches seamlessly to your Prusa MINI or MINI+. The Z-Top connects at the base of the z-axis and replaces the lid of the stock electronics board enclosure, using the same mechanism for attachment.
This is a remix of Prusa MINI Z-Top | Electronics Box Lid and a remix of Prusa MINI | Electronics Box Lid.
Why?
1st model: I liked the idea of more place/air in the electronics box enclosure and the hexagon pattern at the top. But I disliked the holes at the top (in the lid) as it surely will let more dust onto the Buddy board.
2nd model: I liked the idea of holes at the sides, but the lid was missing a lip. Also, the lid was 100% solid.
So, a remix was born:
- Holes moved from the lid to the sides of the base
- The holes in the lid were filled in so no dust could come in from the top, yet still remain the hexagon pattern
How?
Find assembly instructions here: https://www.printables.com/model/72989-prusa-mini-z-top-electronics-box-lid
The model will fit on Prusa Mini+ (180x180)
Settings
Print: 0.15-0.25mm
Nozzle: 0.4mm
Perimeters: 2-3
Support: Not required
Brim: Not required
Infill: 15%
Fill pattern: Gyroid
Recommendation
I suggest printing the lid upside down (top facing the hotbed) thus getting the best smooth surface on the top of the lid.
Happy Printing!
--------------