Behringer PM1 3.5 jack replacement nut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lost the tightening nut on a Behringer PM1. Couldn't find one at the hardware store so I just made one myself
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 634
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- GNU General Public License v2.0
Desc
Lost the tightening nut on a Behringer PM1 in-ear monitoring pack. Couldn't find one at the hardware store so I just made one myself
Instructions
Use 100% infill and as small a layer height your printer can manage to print the threads properly. No need for any supports
You may need to increase or decrease the size by 3% of the model in your slicer for it to fit snuggly
Nut width is M5 but threads and bore size is probably non-standard
Open-sourced
Included Fusion 360 .f3d file if you wanna tweak it. I made the bore 0.3mm bigger to compensate for my Ender 3 printing everything 0.3mm bigger