3D Printed Keycap (in progress)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An artisan keycap simulating a look that it is currently being printed, complete with nozzle.
- Ocena
- 5 / 5
- Polubienia
- 98
- Pobrania
- 133
- Wydruki
- 1
- Wyświetlenia
- 1764
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This keycap looks like it's still being printed. To achieve the “in progress” look, I print the keycap model with 0 top layers, so that whatever infill you choose to show off is displayed. I chose 15% gyroid for the showcase print.
I am reusing the mx stemholder from the filament spool keycap by The_Hunter (https://www.printables.com/model/395184-filament-spool-keycap). The nozzle is a remixed model by Fwiffo (https://www.printables.com/model/58781-nozzleception-nozzle-box), made to be a single piece instead of a nozzle storage container.
All parts were printed as oriented in the files, without supports. A short piece of filament (preferably in the color of the keycap, but I'm not your boss) is used to attach the nozzle to the keycap. I made the hole 2mm, so a 1.75mm filament should work. The stemholder slots into the bottom of the keycap.