KALLAX Inner Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
KALLAX Connector (inside) for connecting two KALLAX units together (using the existing holes and enclosed screws).
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 111
- Wydruki
- 3
- Wyświetlenia
- 810
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a KALLAX Connector (inside) for connecting two KALLAX units together (using the existing holes and enclosed screws).
It is a supplementary connector to securely connect two KALLAX units. We used the design of bostwickenator (https://www.printables.com/de/model/144440-kallax-connector) to connect the two KALLAX units from the outside (works perfect) and the here uploaded connector for the inside of KALLAX - make sure the orientation of the single units is correct!
Prints very easily without anything special.
I used my standard PLA, 0.4 noozle and 0.2mm.
For a higher sturdiness I increased the perimeters, bottom and top layers to 6 and used
60% infill (way more effective than just increase the infill - even if you use 100%). I don't know if this is necessary but using these settings will guarantee a very sturdy connector plate.
By the way, the kids love their new cosy corner and we the shelf space!