KALLAX Inner Connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
KALLAX Connector (inside) for connecting two KALLAX units together (using the existing holes and enclosed screws).
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 111
- Makes
- 3
- Views
- 810
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a KALLAX Connector (inside) for connecting two KALLAX units together (using the existing holes and enclosed screws).
It is a supplementary connector to securely connect two KALLAX units. We used the design of bostwickenator (https://www.printables.com/de/model/144440-kallax-connector) to connect the two KALLAX units from the outside (works perfect) and the here uploaded connector for the inside of KALLAX - make sure the orientation of the single units is correct!
Prints very easily without anything special.
I used my standard PLA, 0.4 noozle and 0.2mm.
For a higher sturdiness I increased the perimeters, bottom and top layers to 6 and used
60% infill (way more effective than just increase the infill - even if you use 100%). I don't know if this is necessary but using these settings will guarantee a very sturdy connector plate.
By the way, the kids love their new cosy corner and we the shelf space!