Bird Buddy Wall Mount Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall bracket for the Bird Buddy smart camera bird feeder.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 362
- Wydruki
- 5
- Wyświetlenia
- 2057
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall bracket for the Bird Buddy smart camera bird feeder.
Based on pictures of the design of the official Bird Buddy bracket but the official mount is still unavailable for some people who have Bird Buddy's with no estimated arrival date so I made my own variation on the design but with features to strengthen the bracket as my first iterations were a bit bouncy.
The mount has been deisgned to have a tight fit around the official pole mount of the Bird Buddy so needs a bit of pressure to squeeze in. It is designed for PETG so PLA might need a little scaling for it to fit effectively. I have included a scaling ring STL/3mf to allow you to scale it up or down to your printers tolerances and check the fit without printing the whole thing.
I printed it with PETG and 6 vertical perimeter shells to give it a bit more strength. I used build plate only supports just to help the curve a little bit at the back and 0.3 layer height for speed.
Can be used with (not required though) https://www.printables.com/model/399736-bird-buddy-pole-mount-insert and an M6 bolt through the base to give extra hold onto the bracket.