Flywoo Firefly nano baby 20 Canopy (Analog)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a canopy that holds the cam without pressing on the polarized lens
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 1286
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
>be me
> New flywoo drone, first flight
>yay.png
>hits steel bar at high speed, camera loses the polarized lens
>ouch.png
Anyway, i had to find a solution for how the cam is held in place since before that it was held in place by that little lens. (Not ideal to me but i get that, its less plastic to print so less cost to manufacture.)
So i came un with this, a canopy with a "belt" that kinda sews the cam in place.
Btw If you want to make that belt a little more secure you can melt it to the inside of the canopy arms using a soldering iron set to the lowest temp (typically 200c)
I think its a better solution even if you have a still intact camera, so i made a version for the people out there which the blindfolded goddess decided to kiss.
Printing instructions:
- Use TPU
- 0.4mm nozzle
- 3/4 Walls (must be as solid as it can be, especially if you rock an Action Cam)
Also if you like the design let me know, use that button! 0-0
And when you print it, Post a Make! Let's get those prusameters!!
Thats all! Play safe!
P.S. now my drone sees like it's trippin on LSD lol