1 / 4
Flywoo Firefly nano baby 20 Canopy (Analog) — image 1
1 / 4

Flywoo Firefly nano baby 20 Canopy (Analog)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

a canopy that holds the cam without pressing on the polarized lens

Rating
0 / 5
Likes
10
Downloads
68
Makes
0
Views
1,289
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

>be me

> New flywoo drone, first flight 

>yay.png

>hits steel bar at high speed, camera loses the polarized lens

>ouch.png

 

Anyway, i had to find a solution for how the cam is held in place since before that it was held in place by that little lens. (Not ideal to me but i get that, its less plastic to print so less cost to manufacture.)

So i came un with this, a canopy with a "belt" that kinda sews the cam in place. 

Btw If you want to make that belt a little more secure you can melt it to the inside of the canopy arms using a soldering iron set to the lowest temp (typically 200c)

I think its a better solution even if you have a still intact camera, so i made a version for the people out there which the blindfolded goddess decided to kiss.

 

Printing instructions:

  • Use TPU
  • 0.4mm nozzle
  • 3/4  Walls (must be as solid as it can be, especially if you rock an Action Cam)

 

Also if you like the design let me know, use that button! 0-0 

And when you print it, Post a Make! Let's get those prusameters!!

Thats all! Play safe!
 

 

P.S. now my drone sees like it's trippin on LSD lol 

Tags