189 models
The canopy is modified to be directly usable with the BetaFPV Meteor 75 Pro O4 hardware, i.e. the surfaces were flattened to account for the screw heads, and the antenna holder was altered to fit the fat O4 Lite antenna. Print in TPU or…
Update 08.02.2026 noticed that you can't flip the video feed in the goggles anymore. So cam needs to be rotated 180 degrees and therefore the "backplate" needed changes 15, 25 and 35 degree mount for Kayoumini 2.5 and the Flywoo O4 Wide…
Updated version now allows easy ND-Filter switch and adds support for 12mm and 15mm Standoffs.
Meteor 75 pro canopy and lens cap for the Flywoo O4 Wide Air Unit 155° FOV
Here is my gps mount that will fit any quadcopter that has a 32mm spacing back plate and 20mm standoffs. was designed for the AOS series of qaud copters but will fit anything that has a back spacing of 32mm. printed with ninja flex tpu.If…
Original Antenna mount by "lukaskroll" on Thingiverse. I have modified one of his models to accommodate the GM10 Mini v3 GPS.
Designed to use M2 screws to attach to the frame. To attach to the O3 Air Unit, I used the cross-head screws that come installed in the Air Unit. I used 95A SainSmart TPU, 100% infill, supports enabled for the O3 Mount but not the Antenna…
Made for Kayoumini with Flywoo DJI O4 Lite Wide-Angle Lens Angle - 35/40/45°
Printed this to use on my meteor75 pro with the flywoo O4 lite lens mod. Still waiting for the lens mod to assemble everyting.
Thank Flywoo for the Arm protector model - you can download that for free from their website. Without these Skidpads / motor protectors / Standoffs (whatever we call them), the Explorer LR4 wobbles and lands on its Beeper. These make sure…
Minimal canopy design for the Meteor 75 Pro 04. It allows camera angles of 5 to 30 degrees. Printed out of Nylon, it weighs 1.36g (after paint) and 1.27g (before paint). Cheers!
This is my take on a tiny whoop canopy designed to accommodate the Flywoo O4 Wide camera. This is currently being used by FPV Manitoba ( https://www.instagram.com/fpvmanitoba/ ) for tiny whoop commercial shoots. It’s a derivative of my…
O4 camera and M100 GPS holder works with flywoo ND filters
This case holds a Flywoo Explorer LR4 O4 and O4 Pro. Picture example is PLA+ 4% infill, 2 walls, 2 top and bottom layers. Supports required for the lid retention rails - Grid 0.21 top and bottom distance. I added modifiers so the case is…
A 18.52x8 Battery Mount for the Flywoo Firefly 1S Nano Baby Quad V2 DC16/FR16. Print in TPU at 0.2mm and possibly 100% Infill. Printed on a Creality Ender 3 Neo (Bowden) slowly with my special TPU profile. Uses the stock mounting method…
DJI O4 air unit pro antennas holder for Flywoo Explorer LR4 drone
GoPro Naked Mount for FlyWoo Flylens 85. I also add a base for NamelessRC Naked GP 9/10/11. Category: Hobby
There are a few mounts around to get the M100 onto the Flywoo Explorer LR, but a lot of them have large covered portions that make me think that heat dissipation wasn't a factor in the designs. With this mount I left both the top and…
I designed a cam mount for the upgrade from the caddx nebula pro to the O3 air unit for the Flywoo Explorer Micro LR drone. Adjustable cam angle from 0 - 35° also added a reference indicator for a 25° cam angle. Print Settings: - Intented…
This is amount for the flywoo ultra wide lens mod for the O4 lite with O4 Pro mounting. I dont hev pics of this mount in particular, but there is some pics of the O3 version of this mount on my meteor75 pro here:…
Transport and storage box for "Firefly 1S Nano Baby V2" from Flywoo. Can store up to 8x 1S LiPos as well. There is enough space for any prop guards.
Angle 40°. Version with mount above the camera stands, and version to use 20 mm holes. I printed with TPU-like filament with supports. P.S. Have not tried to connect GPS yet, will need soft serial for extra UART. P.P.S. Official guide…
This is the direct mount canopy for Flywoo O4 wide lens - without 18mm or 20mm adapter. Which will save almost 4g. Canopy canopy itself is 2.81g. It is mounted using M2 screws to the frame (Crux 3) 0 - 20deg adjustable
I printed it in PLA with 2x0.6mm perimeters, 0% infill, 2 bot 3 top layers, 0.2mm height. It weighs about 10g which is 4g more than the included ones but not having to unscrew the motors is worth it to me. Not sure how strong it'll be but…
Speedybee Mario 5 gps mount Foxeer M10Q-180 and Flywoo GM10 mini V3 with compass
Here is my gps mount that will fit any quadcopter that has a 32mm spacing back plate and 20 mm standoffs. was designed for the AOS series of qaud copters but will fit anything that has a back spacing of 32mm. printed with ninja flex…
Remove the plastic nuts then install underneath the canopy. Printed with ASA
I updated my quad with the new HDZero Nano V3 camera. This camera has the same 14mm mounting as the original Nano Lite camera, but the lens is a little bigger. I made this pod to accommodate the larger lens. There is a small bit of…
This mount fits the GOKU GM10 Pro V3 GPS/Compass from Flywoo. It's specifically designed to be mounted on the FlywooExplorer LR V3 and should be a drop in replacement for the original mount. It may also fit the V4 explorer depending on…
Helper model to design your own mounts for the flywoo lens mod.
Reduced weight of @mosch_3121698 's design by +1 gram. Adapted to 15mm standoffs. 25 degrees only.
This is an adapter to fit the DJI o4 lite camera in the 20mm cam bracket of the Flywoo Flylens 75 and 85, use the DJI screws to attach the adapter to the camera and use the screws supplied with the drone to mount the camera to the bracket
Battery holder for R-line 550 2S batteries to fit in the Firefly 2S Internal measurements 18x14.5mm in case you have a different battery. Prints in TPU with no support
I made arm guards for the Flywoo Explorer LR which are higher than the original ones. This way the arms stay fully protected with mounted side plates. With the original ones the side plates are higher than the arm guards making them less…
This is action camera holder for flywoo explorer LR 4.
Kayoumini Flywoo Wide Canopy 20 degrees 12mm and 14mm Standoffs. I print lens down for best results.
A user wanted me to make this prop guard, but he has not yet reported if its fits, maybe someone can try it and tell me if its fits
This is a protective case for storing your Flylens 75 in your FPV backpack without fear of breaking it. It has space for batteries under the drone, and an optional small case for the USB cable included with the Flylens 75. I printed the…
This is an FPV Camera Mount for the Flywoo Mr.Croc frame. This was designed for the 7 inch frame but should work with any version. For best results, print with head facing up and Max Overhang Angle at a 48 deg minimum.
Prop guard for a Flywoo Firefly 1S Nano Baby, you will need longer screws (2x M2 x 12mm and 2x M2 x 14mm Countersunk).
GNB 2S 300mah / 380mah LiHV GNB Battery Mount Holder for Flywoo Firefly DC16 / FR16 and Nano Baby Quad V2.0 frames. Printed in TPU at 0.20mm PSA: Ensure your flight controller supports 2S batteries before use.
Got myself the flywoo O4 lite ultra wide lens mod with O3 mounting by mistake, so I made this canopy to mounti it to my BETAFPV meteor 75 pro. It should work on any whoop with 25,5mm mounting. Print slowly in TPU with organic supports,…
I took the “thick” version of Vladamyr https://www.printables.com/model/788874-flylens7585-dji-o3-vtx-guard after asking permission and I remixed to fit the Walksnail mini vtx V3, I reduced the cage height sincethe avatar mini is not as…
Ensemble de tpu pour la frame “jeno” version 3 light , avec les tpu pour le système dji 03 naked “Flywoo” ! pour entretoises m2! qui font 4mm de diamètre extérieur .
Light-weight (2.3g / 1.7g) Flywoo O4 Wide Lens mounts for the Kayoumini. My goal with this Mod was to create a very light and compact canopy. By moving the tall Flywoo wide lens in front of the bottom plate it created two additional…
Support GoPro pour le petit Flywoo Exlorer Hex. Category: R/C Vehicles
A quick mashup between the original flywoo exporer part and the excellent Landing gear of @SpeedTripleM3 Print two of those mirrored. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 160 Infill:…
A far better TPU antenna mount holder for your flywoo (or similar) quad. Doesn't let the tube pass through and crush the feed cable (like happened to me right away) There's two options: One for the stock caddx vista. It uses the full…
Mount for the Flywoo Explorer to hold the Foxeer M10Q-250 GPS.
I needed a light prop guard for my Flywoo Firefly18 1S Nano Baby V3 Drone so I don’t scar up the walls in my house. I smashed up the guards it came with real quick and needed a fix. This holds up much better so far and when they do break…
I didn't like the original camera mount on the Flywoo Explorer, therefore I designed a new camera mount. Print in TPU. Will fit Caddx Nebula Pro and probably other 19x19mm cameras.
Thank Flywoo themselves for providing this model! You can get it off their website but theirs doesn't have a cutout like this one does. Without the cutout, good luck trying to get your UFL cables through :( Hopefully this helps someone…
Foxeer Mega 5 FPV Drone Antenna and GPS (Flywoo GOKU GM10 Mini V3) holder, if you want GPS on your FPV copter. Printed in TPU with 15 % infill with supports. You can print upright or laying it does not matter. No special settings needed.…
Works great on the mobula 8. Still a work in progress but it provides much needed lens protection while using the naked o3 camera. I print in TPU 40% infill.
This is a improovement for this amazing drone. You can use it with 4 holes motors (9x9mm) with increases the motors your can use with it. I also added slots for common battery straps. You can print it 3D with PA12CF15 filament or you can…
Remixed a nice base design. Made the antenna hole a bit bigger so it fits easy without slipping out and made it way longer, so the antenna stays secure. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
Holder for the GOKU GM10 Pro V3 GPS. It will fit on 24mm spaced standoffs. The holes are 6mm in diameter. Use the auto rotate in your slicer for best printing orientation. I recommend using auto tree supports only on buildplate.
Here is a mount I designed for the fpv and crossfire antennas for my mr.croc frame from flywoo. Hope you'll enjoy it!
my Flywoo Explorer LR4 O3 came with a bent TPU antenna mount/holder - so I made a a replacement based on original dimensions. In the middle there is a sort of an antenna-plastic-housing stopper (I've seen on another design that it might…
Hi, There are three versions! One without a hidden Airtag and two with a hidden Airtag. The smallest version is the 001_Flywoo_85_Rugged_Box_v9_complete_with_Airtag_140x220 The size with the Airtag is the lower limit, and you have to be…
This is my design for the standard GoPro mount feet.
Ugly file but prints fine, use tpu and supports
Extented the original file by 8mm to achieve maximum antenna length for long range flying ;) Print settings: - TPU or Flex - no support
All model are printed in TPU. Print the VTX support, put 4 bolts in the exhagonal space, fix the VTX with M2 screws and fix the group to the frame. Fix the GPS mount to the back with 2 screws, and use only 1 of the original 2 vertical…
Drop-in replacement for the standard flywoo LR4 antenna mount. Print without supports(turn the holes towards the table). Use TPU plastic. The antenna should slip into the mount.
This is my take on a tiny whoop canopy designed to accommodate the Flywoo O4 Wide camera. This is currently being used by FPV Manitoba (https://www.instagram.com/fpvmanitoba/) for tiny whoop commercial shoots. It’s a derivative of my…
Flywoo Explorer O4 Pro ELRS Gemini Antenna mount, longer mounts for O4 pro antennas and elrs gemini dual band antenna. Printed with TPU with supports.
>be me > New flywoo drone, first flight >yay.png >hits steel bar at high speed, camera loses the polarized lens >ouch.png Anyway, i had to find a solution for how the cam is held in place since before that it was held in place by that…
Remix LID of the Case (@John outdoorvideos) with added Flywoo Logo (https://www.printables.com/model/1316976-flywoo-explorer-lr4-o4-drone-case) + a Remix of the Case increased in height +25mm in Z and adapted LID for the increased…
Mount for the new Insta360 Go 2 flywoo Explorer LR 4. Print the base in PETG and the mount in TPU. You gonna need a M2x12mm bolt and a M2 nut Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200…
Vibration isolated insta360 go 2 mount for your flywoo explorer. Also a great starting point for making your own mount remix for whatever quad you'd like, potentially. Open source web based CAD design in OnShape! I've included 0-45º tilt…
Simple Matek (http://www.mateksys.com/?portfolio=m10-5883) GPS module holder for Flywoo Explorer drone. After printing needs a bit of filing in order to tightly fit GPS module also it is capable to secure GPS with included heat shrink…
this model solves the issue of the trash stock battery holder that flywoo sells for their 2S Firefly….. is intended to be printed with riged materials like PLA and it's designed to be a really tight fit while still being super quick…
I slightly adjusted the dimensions of the 420mah battery holder to make one more suited for a typically sized 450mah. The walls are a bit thinner than the original battery holder so it is easier to install if you have a battery in it.
support pour le crossfire tbs nano , compatible pour la frame Flywoo Mr croc se prend entre 2 entretoises centrales parfaitement ajusté a printer en tpu Category: 3D Printing
Flywoo LR Parts Enjoy! I did not create these objects! Print Settings Printer: Sidewinder X1 Rafts: No Supports: Yes Resolution: 0.15 Infill: 25% Filament: YOYI TPU PINK/GREEN Category: 3D Printing
I printed from petg, but it is better to print from smaller filaments (TPU, PC aero, or other aero materials) It doesn't break on impact Suitable for meteor 75 Feel free to leave your feedback!
Hallo, hatte mal wieder Lust ein kleinen Whoop zu testen und habe mir den Flywoo Flylens schon fertig direkt bei Flywoo gekauft. Bei den guten Preisen mit Rabatt ist es günstiger die Drohne fertig direkt beim Hersteller zu kaufen. Ich hab…
Flywoo Flytimes 85 Removable Propguard If your on the fence between the Flytimes and Flylens 85 or don't want to see propguards in your recordings this is the right model for you. This propguard design lets you instantly transform your…
I saw this tiny 1g gps antenna and decided one needed to go onto a micro toothpick. I built out a betafpv hx115 LR using the Darwin FPV f411 with ELRS and a 18650 battery.
a canopy canopy for the Ant Lite designed to hold the cam at different angles (15°-45°). Multiple versions
Since I've replaced the stock camera mount with O3 pod by @t4obrien - which also holds the ELRS antenna (the stock mount protrudes below the bottom of the frame) the only thing left protruding below the bottom was the buzzer, so I've…
A slightly stronger protective frame for the 1.6" version of the Flywoo Firefly16 Nano Baby V3 drone. Print from PETG or ABS.
The possition of the Crossfire Immortal-T antenna on the Flywoo Explorer LR has a quite good position considering reception. But it is not protected agains being bend or even damaged on a rough landing. I therefore designed these holders…
This is a cooling tower I made that blows air up into and out around the DJI O3 Air Unit when you're configuring a Flywoo Flylens75-85 with the DJI O3 Air Unit. This is so it won't over heat while connected to BetaFlight Configurator (or…
I made it to cover Radiomaster XR4 on Flywoo Explorer but it will fit any 25x25mm stack.
GPS for a FlyWoo Hexplorer/Explorer, same position and mount as original, just allows you to mount a Matek M8Q-5883. Category: R/C Vehicles
GEPRC MOZ7 V2 GPS Mount This model is designed to accommodate a smaller GPS unit than the original mount was intended for. Weight is reduced by more than half. Compatibility Flywoo GOKU GM10 PRO V3 BZGNSS BZ-251 Others with same…
The box fits Flywoo Firefly 20 Pro with rear GPS module attached (I used the Flywoo optional TPU rear with GPS mount). I haven't found a box that fits the drone with the GPS installed, so I made one myself. The case has integrated mounts…
Original screws are too long. I used the 2x4 from this set from Amazon: https://a.co/d/0hV7whhL
Ich hatte keine Lust 10 Euro für Ersatzteile zu zahlen und hab nirgend wo eine stl Datei von den gefunden also hab ich die halt selber nachgemacht. Ist aber noch nicht perfekt!
I switcht from the Caddx Ant to the Caddx Baby Ratel 2 and its a bit longer so i had to modify the design
I decided to convert my Firefly Baby to the O4 Air unit to save some weight and make it capable of capturing 4K video. The removed weight really improves its flight performance. I printed the camera mount out of 82A TPU, but regular 95A…
Added more high to this model so thats here is more space to store additional components in between. two models, one with screw inserts and one with heat inserts for the M2x3 , 1x3 print with ABS or PETG ( if its heat resistant enough for…
Here is my gps mount that will fit any quadcopter that has a 32mm spacing back plate and 20 mm standoffs. was designed for the AOS series of quads. It will fit any quad with 32 mm rear spacing.If you need a different standoff height let…
A simple protective Caspula for large capacitors for Flywoo's Explorer LR4 FPV Drone. It also serves as a level stand for sensor calibration and an elevated foot on muddy ground before takeoff (only with battery mounted). The design is…
