Counting matching models…
Modular Hydroponic Tower made for 2inch Net Pod this is the best model as of now and its a world of difference with the other one. the fact that you dont need to spend hundreds of hours more to print the net pods, simply use cheap…
I originally made a modified 6 pod section which has integrated mounting tabs but figured a mounting section which attaches to the regular 3 or 6 pod section would be more useful. Uses 4x M5 bolts and nuts to mount.
Part list 1x ZK-502L amp (without case) 2x 2inch speaker (I use 4ohm 12w) 1x mini togggle switch on-on (for switch wired/battery mode) 1x DC jack socket 5.5*2.1mm 16x M3*14 1x DC 8-30V Battery Capacity Indicator With Type-C And USB Output…
Symmetrical case for WaveShare ESP32-S3 4.2inch RLCD Simple and fast to print case with symmetrical borders around the display. The case allows to access the USB-C port and SD card slot and comes with 3 little button extensions for the…
3.2inch air hockey puck for incase you ever run out of air hockey pucks. Works on nearly any table that accepts 3.2inch pucks. *Dark colors do not work in most air hockey tables, please use bright colored filament Dimensions: 3.2inch x…
I wanted a 2" freestyle basher but couldn't find one so I made my own. Category: R/C Vehicles
I couldnt find any CAD files online for the Waveshare 3.2inch Resistive Touch Display (B), 320×240, SPI, so I made a rough model myself :)
Modular Hydroponic Tower made for 2inch Net Pod this is the best model as of now and its a world of difference with the other one. the fact that you dont need to spend hundreds of hours more to print the net pods, simply use cheap…
Arm guards, use M2 x 6mm motor screws. Camera mount, support for flywoo 1s cam/ caddx ant, similar 14mm mounting cameras. Dipole antenna clamp, pigtail power wire clamp.
The case is designed to hold a Lightning 2 fpv drone with a top mounted battery holder, and room for six 750mah 2s lipo batteries and 8 two blade 2" props. Might also fit other 2" drone frames. Support my work: All of my models are…
This is 2 inch drone frame in 3 sizes 1.5mm, 2mm, 2.5mm. if you crash this frame will die, but this is 3d printed and you can print new. Enjoy :) fly on this frame:
Just a quick mod to the 6pod section to mount to a 5 gallon bucket lid using 4x M5 bolts and matching nuts. Printed in petg for better temperature resistance and layer adhesion over pla.
I originally made a modified 6 pod section which has integrated mounting tabs but figured a mounting section which attaches to the regular 3 or 6 pod section would be more useful. Uses 4x M5 bolts and nuts to mount.
Creates port to insert cheap amazon hygrometers
The first bits holder was great for a combination of 1" and 2" (25 and 50mm) hex bits. I still had a lot more 2" length bits to store. So I made this version specifically for these bits. It can hold up to 16 bits. It is very compact. It…
A simple example of router templates. I created this one to round the edges of my 3d printer table. Alas, I have no router, but my jigsaw and a penciled tracing was good enough for the project.
EN: This is a sideways sliding cover for 20-23mm (1/2inch) pipe clamps. The clamp must be fully closed for the cover to fit. I have printed it from UV resistant TPU. In the 3MF project file you will also find a mirrored version to slide…
2" Back Flap Loose Pin Hinge For Theatre - from the original by J. R Clancy of Syracuse NY. Created by me in Fusion 360. Used as a demonstration item for my drafting students. I printed the body halves at 0.1mm and the pin at 0.05mm
A desktop vise for holding small items such as printed circuit boards, models, small parts for assembly, etc. The jaws have a maximum opening of 50mm (about 2 inches). Printable in the orientation shown with no supports. Although the…
My father showed me how to process black and white film, when I was 10. Since then, it is something I have been coming back to several times in my life. Now, with a shock wave of ai-generated mumbo zambo coming our way, it is time again…
A CrowPanel ESP32 4.2-inch E-paper HMI display from Elecrow is used as the display. For aesthetic reasons, the switch and GPIO port should be hidden. Space was also needed to hide a battery. The screen is mounted from the inside with hot…
Adapter for iAFS2 - iOptron 2" Inline Automatic Focuser to SCT 2″ thread (2″-24tpi) You can buy a commercial version from RAFCamera, well made from Aluminum but relatively cheap. Category: DIY
Part list 1x ZK-502L amp (without case) 2x 2inch speaker (I use 4ohm 12w) 1x mini togggle switch on-on (for switch wired/battery mode) 1x DC jack socket 5.5*2.1mm 16x M3*14 1x DC 8-30V Battery Capacity Indicator With Type-C And USB Output…
Symmetrical case for WaveShare ESP32-S3 4.2inch RLCD Simple and fast to print case with symmetrical borders around the display. The case allows to access the USB-C port and SD card slot and comes with 3 little button extensions for the…
A 60mm net cup that I made for a mason jar. Could be used for hydroponics. Can be a substitute for other net cups 4-21-20 Added 3 inch and 2 inch, tested both, they are supportless Print Settings Printer: Ender 3 Pro Rafts: Doesn't Matter…
This is to fit the: Kodak 35 mm U-Core 2 inch / 52mm film core/spool and 400ft to 100ft Bulk Film Respooler by @MaslovyRohlik originally the [Thingiverse] 400ft to 100ft Bulk Film Respooler by @broken_perfectionist This is a handy device…
a 3 gauge, gauge cluster mount for underneath the dash. Width is 9 inches and the height is 3.750 with a front to back depth of 2.562 mounting holes are .188 i personally designed it for my 1968 chevy c30 dump truck so i could have, temp…
Calibration Tower Height 10-50mm (10mm Steps) Tower mit Stufen in 10mm Schritten zur Calibration der Z Achse Print Settings Printer Brand: Creality Printer: Ender 3 Filament: BASF PLA black Category: 3D Printing Tests
Quite accurate model of Milwaukee sawzall blade. However, the real blade has a little bit of curve to it and the teeth are bend out. Will be good help when creating your own custom handles and blade protectors.
This is a Display Stand for a 12 Inch (30 cm) Silicon Wafer On my 30x30cm Printing bed i could print in one piece For smaller printers i did make a 2 piece version that needs to be glued together For printing orientation you just need to…
Features magnetic attachment adjustable pitch angle adjustable iPad rotation, with 90deg clicks Additional Material A rod in 32mm diameter. I'm using the core of a depleted plastic wrap 6-32-½ machine screws x 2 4x4x3mm magnets x 89 Super…
A little Adapter for 2inch Netcup Hydro-,Aqua-,Aeroponic Systems. It enables the direct use of this Rockwool-holder: https://www.printables.com/model/65737-rockwool-cube-holder for easy growing from seed to finish. I designed that part…
A simple lid to plug empty 2inch Netcup holes in a Hydroponic System to prevent algae growth. Can be printed in any non-transparent material.
Deutsch [English below]: Ich wollte ein kleines Display haben auf dem ich morgens und abends im Badezimmer eine Übersicht über das Wetter der kommenden Tage und rudimentäre Informationen aus dem SmartHome ablesen kann. Hier ist natürlich…
Assuming that you already have shelf peg holes spaced at 2 inch intervals and merely want to add another hole spaced 2 inches out, simply insert this into the last two peg holes and mark off the new hole.
This is Mike Wasalwski Mini Monster Drone :) It was inspired by the character Mike Wasalwski of Monsters Inc. for having only one eye ... (yes, it should be green, but I didn't have green TPU at the moment ... sorry ..: /) But let's get…
Printed at 75mm/s (infill speed) and 50mm/s (wall speed) 215 extruder 60 bed 0.3 mm with 0.4mm nozzle
Lid is modified to cover the TFT/LCD and fixed antenna hole. Base has been reinforced at the bottom. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.4 Infill: 15% Filament: Prusament PLA BLACK…
I wanted to use the “2inch Desktop Vise” together with my Magnetic Helping Hand ¹) and the PLA-printed vise simply promised to be too light to have a firm stand. So I added holes to the base, where I could add 8 neodym magnets (two for…
The inner and outer rings are gapped with .5mm for a piece of window mesh, anything less then .5 and thicker and than .3 will be perfect. I used harbor freight 8x2mm magnets and found them to be a little weak, go for stronger magnets
I wasnt able to find a buckle for 2inch strapping that I liked. So I remixed 3DMakerNoobs. Its basically the same, split down the middle, widened and extended. I printed in PLA.
BearQuads TinyBear 2inch drone racing frame TPU parts You can find the frame here: https://armattanproductions.com/pages/product_details/33079 https://www.facebook.com/BearQuads
1/2inch Marble/Steel ball container, suitble for Gravitrax balls. It can hold up to 32 balls.
if you are looking for a simple and quick to print wall for your board games, this model is the one! They measure is 2 inches long and 1 inch high. and it has the clips to easily attach them together Thank you for your support! follow me…
Friend needed a extender for his DnD tokens because they moved sometimes and bigger monsters needed a bigger footprint for visual reasons. Made this quickly printed and tested and worked without a problem.
YMZFPV provided me with this TPU Battery Holder STL for their Lightning1 2" FPV Quadcopter. I also made a larger remix for Tattu 550mah batteries that were slightly bigger.
spacer 5mm/0,2inch Filament used: https://s.click.aliexpress.com/e/_EJEGknk
'lil adapter that allows to drive the screws without any torque. When I change the tires, there is always 4*5 screws to tighten. Each one with 20 turns. OMG 400 TURNS. :) All done by hand. And after that they are to tighten up to the…
This started out as a case to house a TTGO LORA board, additions include a place for a folded dipole, a 2inch screen, a jpole as an alternate to the folded dipole and a GPS module and antenna. It does get a bit tight with the wiring…
![Mike Wasalwski ["Mini Monster"] 2inch Quad](https://media.printables.com/media/prints/352968/images/2997812_1cdd4837-e1b1-4674-bc28-08b3ca6d2d1d/large_display_img_2407_352968.jpg)
